H-IPRF-16QAM IP To RF Modulator

H-IPRF-16QAM IP To RF Modulator The H-IPTV-16QAM modulator is a simple all-in-one utility device to convert up to 1024 IP Transport Streams in UDP / RTP into 16 non-adjacent QAM Channels. This Thor Broadcast high-density IP to QAM modulator is designed to take content delivered via an IP backbone or CDN system and modulate the programming onto digital QAM cable channels for distribution over coax. This product includes a 1RU chassis supporting two individual Ethernet inputs injecting up to 840Mbps on each Ethernet RJ45 connector outputs That all programming onto a single RF F-Type connector for easy output into your RF Coax infrastructure. This single RU form factor allows you create your own IP to RF headend in a single chassis. All QAM Channels and IP inputs are managed from the easy to use NMS RJ45 port connection on the front of the unit allowing you to quickly and easily access your programming from Thor_x0092_s easy to read GUI That can be accessed from anywhere on your network. The IPTV programming input is standard headend format, meaning basic UDP / RTP unicast/multicast IGMP v2 / v3 addresses and port format. This impressive density allows a single chassis to convert an IPTV Ethernet backbone feed to be converted to a full lineup of digital cable DVB-C channels for easy distribution. Features: IPTV Modulator includes 2x Gigabit Ethernet input interfaces 16 Clear QAM Channel Outputs - Non-Adjacent 50-960Mhz Maximum 1024 Channels TS over UDP, RTP & Unicast / Multicast Output of RF on 16 Multiplexed, Scrambled, or QAM (DVB-C) Channels Gigabit Ethernet is serviced by SFP interface Supports Unicast and Multicast, supports IGMP v2 / v3 Max 840Mbps for each GE Input Supports Up to 180 PIDs per channel with PID remapping (manual or auto) Web NMS Network Management Software for easy online access and management  Specifications: Input 512 × 2 IP inputs, 2x 100 / 1000M Ethernet port (SFP) Transport Protocol TS over UDP / RTP unicast and multicast, IGMP V2 / V3 Transmission Rate Max 840Mbps for each input GE Mux Channel input - 1024 Output Channel - 16 Max PIDs - 180 per channel Functions PID remapping (auto / manually optional) PCR accurate adjusting PSI / SI table Automatically generating Scrambling Parameters Max simulscrypt CA - 4 Scramble Standard - ETR289, ETSI 101 197, ETSI 103 197 Connection - Local / remote connection Modulation Parameters QAM Channel - 16 non-adjacent carriers Modulation Standard - EN300 429 / ITU-T J.83A / B Symbol Rate - 5.0 ~ 7.0Msps, stepping 1ksps Constellation - 16, 32, 64, 128, 256QAM FEC - RS (204, 188) RF Output Interface - 1 F-type output for 16 carriers, 75 ohm impedance RF Range - 50 ~ 960MHz, stepping 1kHz Output Level - -20dBm ~ + 10dBm (~ 87 117db?V), 0.1dB stepping ACLR - -60 dBc TS output - 16 IP output over UDP / RTP / RTSP, unicast / multicast, 2 x 100 / 1000M Ethernet Ports System - Network Management Software (NMS) Dimensions - 420mm × 440mm × 44.5mm (WxLxH) Weight - 10lbs Temperature - 0 ~ 45C (Operation) -20 ~ 80C (Storage) Power Supply - AC 100V ± 10%, 50 / 60Hz or 220V AC ± 10%, 50 / 60Hz Consumption - 15.4W Product Documents & Videos Spec Sheet Click to Download User Manual Click to Download